|
| | | Forum Newbie
Group: Forum Members
Last Login: 8/14/2009 9:51:25
Posts: 3, Visits: 8 |
| | Hi, I recently bought the VR920. Had lots of problems with the picture. I went through all the forums and tried various things. I am getting a blue screen on the VR920 display when I use the DVI-VGA adapter which came with the unit. On the I-Monitor and the Nvidia graphics it is detecting and I have used all the correct settings, but still there is a blue screen. When I am using the VGA every thing works OK, except the screen is shaky on the VR920 display with stereo switched on. I did try to correct the seperation using the ctrl+F8. The tearing of the screen from top to bottom corrected a bit but every few seconds the picture shakes. One of the forum there was a mention about trying the DVI-VGA adapter, but that does nt work in my case. My config Window vista 32, Nvidia graphic 8400, dual core. Did try the Glovepie- mouselook and TrackIR- same problem. There is not problem with the tracking. Only display output is not stable. If I disable the stereo the picture is steady but in 2D and if I change to 3D(by changing the L-R eye on the Vr920 menu) the screen hangs, which i can restore by going back. Please help! |
| |
| | | Forum Member
Group: Forum Members
Last Login: 10/10/2009 3:08:52 PM
Posts: 34, Visits: 78 |
| | Well I use the Adapter with no issues, but also make sure your hz is set at 60, when I forget when I change the screen res, sometimes it changes the hz and then I get a blue screen. Just make sure you are using the right 3d drivers if ur not using vuzix3d, upgrade the glasses and maybe the firmware if not done.. Does your video card have 1 vga and 1 dvi? Cause you said using the vga port works? Ku |
| |
| | | Forum Newbie
Group: Forum Members
Last Login: 8/14/2009 9:51:25
Posts: 3, Visits: 8 |
| Thanks for reply.
Yes my graphic card has both VGA and DVI, and I am using 60hz and all the latest driver and updates. Any ideas how can I stop the picture shaking from right to left. Its not because of the stereo, that I understand. It moves every few seconds. |
| |
| | | Forum Newbie
Group: Forum Members
Last Login: 8/14/2009 9:51:25
Posts: 3, Visits: 8 |
| | Problem sorted. The screen jerking/shaking can be corrected by using highter options than bilinear setting on the FSX setting. Tri and anisotropic setting stops the shaking. Using the deflault Nvidia 3D setting for FSX works fine for me. |
| |
|
|